Parallel Strokes: Several Colored Lines Side by Side on One Line
ꐙꃅ ꉬꀋꉬ
- ꀋꊿꏃ
- Lite
- Pro
- Lite Pro
- Pro Business
Parallel is a line style that draws one line as several colored strokes side by side. Use it when one route carries more than one thing: a gas main next to a water main on the same easement, the two edges of a road or a bike lane beside it, twin rail tracks, or two cables in one trench.

By default every stroke becomes a line of its own when you finish drawing, so each cable or lane can carry its own name and data (see "Separate lines" below). If the strokes are only a look, clear Separate lines and the line stays a single shape whose strokes never drift apart.
Parallel is one of the Pro line styles. On a free account, drawing with it uses a line style credit.
Apply Parallel to a line
- ꀊꌠ the line, or pick a line tool (ꀊꌠ, Pen or ꉈꅐ) to set the style for the next line you draw.
- ꇬꀊ the line type picker (the swatch showing the current line style).
- Choose the Parallel strokes row (three colored lines, below the dashed styles), or ꇬꀊ the gear on that row.
- The strokes editor opens under the picker. The line starts with three strokes, red, green and blue, each at 90% opacity. Raise a stroke to 100% in its color picker if you want it solid.

Every change in the strokes editor shows on the map straight away. Lines you draw next keep the same strokes.
Edit the strokes

In the strokes editor you can:
- Recolor a stroke: ꇬꀊ its color square and pick a color. The color picker opens under the square. Its opacity slider sets that stroke's opacity on top of the line's, so one cable can be fainter than the others.
- Reorder: ꀋꂿ the up and down arrows. The first stroke is on the left ꀊꌿ of the line, looking from its start.
- ꉬꈭꌠ a stroke: ꇬꀊ the ×. A line keeps at least ꀋꉆꀋꉻꈬꀋꌠꀋꉬ stroke.
- Add stroke: up to 8 strokes. At 8 the editor shows "Up to 8 strokes".
- ꀊꌠ: leave it on ꀊꌠ to ꀋꂿ the line width, or type a width for that stroke only. Strokes sit edge to edge at their own widths, so a wide stroke never covers its neighbor.
- ꀊꀃ: the space between strokes (2 by default). Pick its unit beside it:
- px (pixels, up to 20): the same space at every zoom level. Best for visualizations, where the bundle should look the same however far you zoom.
- m, km, ft, yd or mi: a distance on the ground. The strokes sit that far apart on the map, so they spread as you zoom in, like lanes on a road or conduits a set distance apart.
- Funnel into ends (off by default): the strokes close in to the line's two end points, useful when the line runs between two boxes or vaults. Taper length sets how far from each end they start to close in, from 1 to 60 pixels (18 by default).
- Separate lines (on by default): draw each stroke as a line of its own. See below.
To reopen the editor later, ꀊꌠ the line and ꇬꀊ the small gear on the line type swatch.
The line width sets the width of every stroke that has no width of its own, and the ꀊꉬꃅ draws one casing around the whole bundle.
Separate lines
Separate lines is ticked by default, because the strokes are usually separate things: three cables in ꀋꉆꀋꉻꈬꀋꌠꀋꉬ trench that each need their own name, data or legend entry, or lanes of a road that split off at different points. ꀀꋌꇬ it when ꀀꋌ only want the look.
- While drawing: every line ꀀꋌ draw with Parallel shows the strokes as ꀀꋌ draw. ꀊꌠ ꀀꋌ finish, it becomes ꀋꉆꀋꉻꈬꀋꌠꀋꉬ solid line per stroke, in a new folder called Parallel lines (or the line's title).
- On a line ꀀꋌ already drew: ꀊꌠ it, ꇬꀊ the gear on its line type swatch and tick Separate lines. The line is replaced by ꀋꉆꀋꉻꈬꀋꌠꀋꉬ line per stroke and the editor closes.
- ꀀꋌꇬ: ꀋꉆꀋꉻꈬꀋꌠꀋꉬ Undo brings the single line back (or removes the new lines, if ꀀꋌ just drew them).
Each separate line is a real line with its own points, placed exactly where its stroke was drawn. A gap in pixels is fixed on the ground at the zoom ꀀꋌ drew at, so the lines spread as ꀀꋌ zoom in and close up as ꀀꋌ zoom out, like any lines. A gap in a ground unit is that distance. Because the points are real, a line stays put ꀊꌠ ꀀꋌ change its style (to an animated line, say), and it exports to GeoJSON, KML and GPX where ꀀꋌ see it.
ꇬꀊ a line to ꀊꌠ just that line. To move ꀋꉆꀋꉻꈬꀋꌠꀋꉬ line or break it off, drag it or its points. The lines remember which set they came from, and that is saved with the map, so lines ꀀꋌ drew yourself never join a set even ꀊꌠ they happen to line up with ꀋꉆꀋꉻꈬꀋꌠꀋꉬ. ęܧęܧ ꀋꉆꀋꉻꈬꀋꌠꀋꉬ line of a set and the others still work as a set.
Continue a set: with Parallel strokes picked as the line type, start drawing from the end of any line of the set with the ꀊꌠ, Connected Line or ꉈꅐ tool. The preview shows every line growing, and ꀊꌠ ꀀꋌ finish, each line of the set is extended beside the others, turning the corners with ꀀꋌ. ꀋꉆꀋꉻꈬꀋꌠꀋꉬ Undo takes the extension back from all of them. Lines that funnel into ꀋꉆꀋꉻꈬꀋꌠꀋꉬ end point can only be continued ꀋꉆꀋꉻꈬꀋꌠꀋꉬ at a time.
Continue ꀋꉆꀋꉻꈬꀋꌠꀋꉬ line: pick another line type (ꀋꊨ, for example) and start drawing from the end of the line ꀀꋌ want. The snap goes to the end nearest the pointer, and only that line is extended.
Separate lines are plain lines, so the strokes editor, ꀊꀃ and Add stroke no longer apply to them.
Switch to another style and back
If ꀀꋌ switch a Parallel line to ꀋꊨ or Dashed, its strokes are kept but not drawn. Switch it back to Parallel and the same colors return.
Shapes
ꆐꊈ, rectangle and circle borders can be Parallel too. On a closed shape the strokes run all the way around and never funnel. The fill stays inside the border.
Legends
Add to legend from a Parallel line shows the same colors in the legend swatch, and they are kept when the map is saved.
Exports
ꌠꊨꌠ, prints and embedded maps show the strokes exactly as in the editor. KML and GPX have no way to describe several strokes on ꀋꉆꀋꉻꈬꀋꌠꀋꉬ line, so they export a single Parallel line in the first stroke's color. Separate lines export as normal lines, each in its own color and at its own position, in GeoJSON, KML and GPX alike.
Developers and Scribble AI
The style keys are lineType: 'parallel', strokes (a list of { color, width, opacity }), strokeGap, strokeGapUnit ('m', 'km', 'ft', 'yd', 'mi' or 'nmi'; leave it out for pixels) and strokeTaper. Separate lines are plain lines with their own points. For example:
overlay.setStyle({ lineType: 'parallel', strokes: [{ color: '#FFD400' }, { color: '#1E88E5' }, { color: '#43A047' }] })
ꀀꋌ can also ask Scribble: "make this line yellow, blue and green side by side", "draw the next lines as separate lines" or "split this line into separate lines".
See also
- The article on kite and block arrow line types
- The article on adding an outline to lines and shapes
- The article on animated flow lines
ꊂꀊꒉ ꆹꑍ